Jul. 26, 2021
All machines need to maintain carefully, digital PVC cutting machine is no exception. Today, as a digital cutting system supplier, I would like to introduce a guide for its maintenance.
According to the official operation method, it is also the basic step to guarantee the long service life of the PVC cutting machine. Operation basing on the standards can diminish the failure rate of the equipment.
When you turn off the main power button. Do not force shutdown, do not power off suddenly. When the machine is working naturally, if the power is suddenly cut off, the components, especially the hard disk, will be damaged because of the recognition operation of the quite hot software.
Generally, prevent bumps and avoid irritating corrosive liquid contamination. When cleaning the housing is needed, wipe with a wet cloth that is screwed dry or use a soft cloth dipped in a special cleaner. Avoid sharp objects from touching the housing. When switching the cutter head, care should be taken to insert and pull it softly to prevent damaging the shell mistakenly.
High Speed Large Format Cutting System
It is recommended that the PVC Cutting Machine should be placed in a place without direct sunlight or other heat radiation, due to the fact that the sun is too strong, the surface of the machine will overheat, which is not good to the maintenance of the machine. Besides, the surrounding environment should not be too wet. The bed of the paperboard cutting machine is made of metal. The excessive wetness will make the cutter rust easily, the running protection of metal guide rail raises, and the cutting speed is reduced. Do not put it in places with too much dust or corrosive gas, because these environments are easy to damage the electronic components of board cutting machine, or cause poor contact and short circuit between components, thus affecting the regular operation of the equipment.
Carry out regular maintenance according to the maintenance procedures and frequency in the instruction manual, take notice of the time of lubricating oil and cleaning the oil pot.
Every working day, the dust of the machine tool and guide rail must be cleaned to keep the bed clean, turn off the air source and power supply when off work, and drain the remaining gas in the pipe belt of the machine tool.
If the machine is left for a very long time, switch off the power supply to prevent nonprofessional operation.
High speed large format cutting system of IECHO has developed SC high-speed large-format static cutting system to cut single-ply and few-ply material independently, it adopts an advanced control system, which is with high cutting speed, high precision, strong stability. The system is easy to operate, which can cut some soft materials, such as carbon fiber, glass fiber, PVC, ETFE, PTFE, HYPALON, oxford cloth, leather automatically with high speed (without making sampling, drawing a line, and cutting dies).