Ua hālāwai ʻoe i kēlā ʻano kūlana?I kēlā me kēia manawa mākou e koho ai i nā mea hoʻolaha hoʻolaha, ʻōlelo nā hui hoʻolaha i nā mea ʻelua o ka papa KT a me PVC.No laila he aha ka ʻokoʻa ma waena o kēia mau mea ʻelua?ʻO wai ka mea ʻoi aku ka maikaʻi?I kēia lā e lawe ʻo IECHO Cutting iā ʻoe e ʻike i ka ʻokoʻa ma waena o nā mea ʻelua.

He aha ka papa KT?

ʻO ka papa KT he ʻano mea hou i hana ʻia me nā ʻāpana polystyrene (i hoʻopau ʻia e like me PS) i hoʻoulu ʻia e hana i ke kumu papa, a laila uhi ʻia a kaomi ʻia ma luna o ka ʻili.ʻO ke kino o ka papa he pololei, māmā, ʻaʻole maʻalahi e pōʻino, a maʻalahi hoʻi e hana.Hiki ke pa'i pololei 'ia ma ka papa ma o ka pa'i pale (papa pa'i pale), pena (pono e ho'ā'o 'ia ka ho'ololi o ka pena), laminating ki'i adhesive, a me ka pa'i pena.Hoʻohana nui ʻia ia i ka hoʻolaha, hōʻike a me ka hoʻolaha ʻana, nā hoʻohālike mokulele, nā mea hoʻonaninani hale moʻomeheu, hana kiʻi, a me ka ʻeke.

He aha ka PVC?

ʻIke ʻia ʻo PVC ʻo Chevron board a i ʻole Fron board.He papa ia i hana ʻia e ka extrusion me ka hoʻohana ʻana i ka PVC (polyvinyl chloride) ma ke ʻano he kumu nui.ʻO kēia ʻano papa he ʻano maʻalahi a palahalaha, he ʻano meli e like me ke ʻano o ka ʻāpana keʻa, ke kaumaha māmā, ka ikaika kiʻekiʻe, a me ke kūpaʻa maikaʻi i ka wā.Hiki iā ia ke pani i ka lāʻau a me ke kila.He kūpono no nā kaʻina hana like ʻole e like me ke kālai ʻana, ka huli ʻana o ka lua, ka pena pena, ka hoʻopaʻa ʻana, a me nā mea ʻē aʻe.

He aha ka ʻokoʻa ma waena o lāua?

Nā mea like ʻole

ʻO ka PVC kahi mea palaki, aʻo ka papa KT i hana ʻia me ka ʻūhā.

ʻO ka paʻakikī, ka paʻakikī, a me ke kaumaha e alakaʻi i nā kumukūʻai like ʻole:

ʻO ka papa KT he papa pahu me ka huʻa i loko a me kahi papa o waho.He māmā a kūʻai aku.

Hoʻohana ʻo PVC i ka plastik e like me ka papa o loko no ka huʻi ʻana, a ʻo ka ʻaoʻao o waho he PVC veneer, me ke kiʻekiʻe kiʻekiʻe, ke kaumaha 3-4 mau manawa ʻoi aku ke kaumaha ma mua o ka papa KT, a me ke kumu kūʻai 3-4 mau manawa ʻoi aku ka pipiʻi.

Nā pae hoʻohana like ʻole

He palupalu loa ka papa KT no ka hana ʻana i nā hiʻohiʻona paʻakikī, nā ʻano, a me nā kiʻi kiʻi ma muli o kona palupalu i loko.

ʻAʻole ia he pale lā a i ʻole ka wai ʻole, a hiki i ka blistering, deformation, a pili i ka maikaʻi o ke kiʻi ʻili ke ʻike ʻia i ka wai.

He maʻalahi ke ʻoki a hoʻokomo, akā ʻano palupalu ka ʻili a maʻalahi hoʻi e haʻalele i nā meheu.Hoʻoholo kēia mau hiʻohiʻona e kūpono nā papa KT no nā noi i loko e like me nā papa hoʻolaha, nā papa hōʻikeʻike, nā leka, a pēlā aku.

ʻO PVC ma muli o kona paʻakikī kiʻekiʻe, hiki ke hoʻohana ʻia no ka hana ʻana i nā hiʻohiʻona paʻakikī a me ke kālai maikaʻi.A he pale ia i ka lā, anti-corrosion, wai ʻole, a ʻaʻole maʻalahi deformed.Loaʻa i nā hiʻohiʻona o ke ahi a me ka pale wela, hiki ke hoʻololi i ka lāʻau ma ke ʻano he mea ahi.ʻO ka ʻili o nā panela PVC he maʻalahi loa a ʻaʻole hiki ke huki.Hoʻohana nui ʻia no nā hōʻailona o loko a me waho, nā hoʻolaha, nā pahu hōʻikeʻike, a me nā manawa ʻē aʻe e koi ai i ke kūpaʻa ikaika o ka wā a hiki ke hoʻohana ʻia no ka manawa lōʻihi.

No laila pehea mākou e koho ai?

Ma ke ʻano holoʻokoʻa, i ke koho ʻana i nā papa KT a me PVC, pono e noʻonoʻo piha i nā mea e like me nā pono kikoʻī o kēlā me kēia kanaka, ka hoʻohana ʻana i ka ʻāina, nā waiwai kino, ka hiki ke amo, ka plasticity, ka lōʻihi, a me ka hoʻokele waiwai.Inā makemake ka papahana i ka māmā, maʻalahi e ʻoki a hoʻokomo i nā mea, a pōkole ka hoʻohana ʻana, ʻoi aku ka maikaʻi o nā papa KT.Inā makemake ʻoe i nā mea ʻoi aku ka lōʻihi a me ke aniau me nā koi haʻahaʻa kiʻekiʻe, hiki iā ʻoe ke noʻonoʻo e koho i ka PVC.Pono ka koho hope loa e pili ana i nā pono kiko'ī a me nā kālā e hoʻoholo ai.

No laila, ma hope o ke koho ʻana i ka mea, pehea mākou e koho ai i kahi mīkini ʻoki kūpono kūpono e ʻoki ai i kēia mea?Ma ka ʻāpana aʻe, e hōʻike ʻo IECHO CUTTING iā ʻoe pehea e koho pono ai i kahi mīkini ʻoki kūpono e ʻoki i nā mea…