Business owners running graphic and advertising stores almost all face the same headache: recruiting people is hard, and retaining them is even harder. Professional die-cutting masters command high salaries and have many demands, which mid-to-small stores simply cannot afford to maintain. If you hire a novice, the training cycle is long, the learning curve is slow, the quality of what they cut is unstable, and customer complaints keep rolling in. Is there a piece of equipment that allows regular employees to operate after simple training and cut finished products at the level of an old master? The IECHO PK series intelligent cutting system gives an affirmative answer. With its ultra-simple operational logic and an design that is extremely friendly to beginners, it is helping store owners thoroughly break free from their reliance on “masters.”
Ultra-Simple Operation: Independent on-the-job operation after just 2 hours of training.
The operational interface of the IECHO PK series has been specially optimized so that even beginners with absolutely no equipment operation experience can quickly get started. The equipment can be configured with a touchscreen all-in-one PC, where all operations are completed through intuitive icons and buttons, eliminating the need to memorize complex key combinations or command codes. IECHO has simplified the entire operational process into three steps: import the file, select the material, and start cutting. In the first step, the user imports the design file (supporting mainstream formats such as DXF, PDF, and AI) into the equipment control system via a USB drive or network; in the second step, they select the current material type to be cut from the material library on the touchscreen interface, such as “car sticker” or “KT Board 5mm”; in the third step, they press the start button, and the equipment automatically begins cutting. It is just that simple. According to IECHO training statistics, a new employee with no equipment operation experience can independently complete the entire process from file import to finished product output after 2 hours of training. This means store owners can recruit employees from the regular labor market without needing to headhunt professional masters with high salaries, drastically reducing labor costs and recruitment difficulties.
Intelligent Positioning: CCD automatic alignment, saying goodbye to naked-eye calibration.
On traditional equipment, material positioning is a technical skill. Operators need to visually inspect the alignment between the material edge and the cutting starting point, manually adjust the material position, and reconfirm repeatedly. This process is not only time-consuming but also highly reliant on the operator’s experience and eyesight. Once the alignment is inaccurate, the entire sheet of material can be ruined. The CCD vision positioning system, which comes standard on the IECHO PK series, thoroughly solves this issue. The operator only needs to place the material roughly on the working table surface and activate the positioning function; the equipment will automatically shoot the registration marks, automatically calculate the material offset, and automatically adjust the cutting start position. The entire process takes only a few seconds and requires no manual intervention. Even a beginner on their very first day of work can achieve a precise positioning of ±0.1mm, cutting finished products just as accurate as those made by an old master. This feature holds revolutionary significance for storefronts, it shifts product quality from “relying on personal skills” to “being guaranteed by equipment.”
Process Presets: One-click call, no parameter debugging experience required.
The configuration of cutting parameters is another technical barrier. Different materials require different tools, speeds, pressures, and cutting passes. On traditional equipment, operators must set these parameters based on experience, and sometimes need to verify and fine-tune through test cuts. This is not only time-consuming, but improper parameter settings can lead to incomplete cuts or cutting completely through the backing paper. The IECHO PK series features a built-in preset process library, covering standard parameters for dozens of commonly used materials in the advertising and graphic industry. The operator only needs to select the corresponding material in the material library, and the equipment will automatically call up the verified optimal parameter combination. For materials unique to the store or special processes, operators can also save the tuned parameters as a custom recipe, which can be called up with one click next time. Without needing to understand the meaning of each parameter or make repeated test cuts, beginners can stably output high-quality finished products. With its three major designs of ultra-simple operation, intelligent positioning, and preset processes, the IECHO PK series truly achieves the goal of “everyone can use it, and everyone can use it well.”